Eternabond Window Seal Tape

Basic UseETERNABONDĢERNABONDWindowSeal Tape is a self sealing adhesive that creates a water tight seal betweenthe window frame and virtually all structure surfaces. Irregular or curved surfaces areeasy because Eternabond WindowSeal is extremely conformable. WindowSeal, if keptWindowindowarm (room temperature+) prior to installation can be installed at temperatures aslow as 20ºF, and as low as -20ºF with optional EternaPrime. No staples or nails required.Seal™SealCompositionTo seal all windows whenTWindowSeal utilizes EternaBond’s advanced MicroSealant™ Technology, a 100% solidsinstalled reinstalled r gardless of rformulation of synthetic resins, thermoplastics, and non-curing rubbers, with a built insurfaces being joined.primer on a stretchable, low density polyethylene (LDPE) backing.WindowSeal TaWindowSeal T pe creates a rmoisture tight, air and vapormoisturTechnical Databarrier and can be applied Standard roll size4’, 6’, X 50’during extremely cold during extrStandard case quantity100 sq. ft. per casetemperatures easilytemperatur.es easilyAvailable widthsup to 48"WindowSeal features EternaBond’s WindowSeal features EternaBond’Application tempAbove -20ºFself-sealing advanced MicroSealant™anced MicroSealantTotal thickness20 milsTechnologTy,y a sealant so advanced itPeel adhesion135 oz/in widthpermanently bonds to create a FlexibilityExcellentpermanent, flexible seal to a wideBacteria resistanceExcellentrange of surfaces including glass,Fungal resistanceExcellentwood, aluminum, vinyl, OSB,Low temp flexibilityExcellentpolyethylene, polypropylene,ESag rating>200ºFTpolystyrene, Tyvek™Tyvek , fiberglass, brick,EWater absorptionLess than .05%concrete, masonry,y and virtually allRShelf life UP to 5 yearsconstruction materials.NASurface PreparationBSurface must be clean and dry. Moisture, dust, dirt, and other foreign matter shouldObe removed. Remove oil, grease, etc. with a suitable cleaner.NDWApplicationEternabond EternaPrime has been developed specifically for use with WindowSeal andinall Eternabond Tapes. Use EternaPrime before applying Eternabond WindowSeal Tapesdover a dirty or rusty surface. Use the EternaPrime if the roof temperature is belowow40ºF. Let EternaPrime dry to a tacky consistency before applying EternabondSWindowSeal Tapes. To apply the WindowSeal, remove the release liner and apply toethe surface(s) to be protected or sealed. Rub to activate.al ™ ™ETERNABOND, Inc.Hawthorn Woods, IL, USATelephone: 888-336-2663Fax: 847-540-7413www.eternabond.com