exam braindumps dumps study guides trainning materials questions and answers PDF 640-863

Test4pass Easiest way to pass IT exams


Exam
:
Cisco 640-863
Title
:
Designing for Cisco
Internetwork Solutions
Version :
Demo
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---

Test4pass Easiest way to pass IT exams


1. Which two of these are functions of an access point in a Split MAC Network Architecture?(Choose two.)
A. EAP Authentication
B. MAC layer encryption or decryption
C. 802.1Q encapsulation
D. Process probe response
Answer: BD
2. Lightweight access points are being deployed in remote locations where others are already operational.
The new access points are in a separate IP subnet from the wireless controller. OTAP has not been enabled
at any locations.
Which two methods can the AP use to locate a wireless controller? (Choose two.)
A. local subnet broadcast
B. NV-RAM IP address
C. DHCP
D. primary, secondary, tertiary
E. DNS
F. master
Answer: CE
3. Which of these is the equation used to derive a 64 Kbps bit rate?
A. 2 x 8 kHz x 4-bit code words
B. 8 kHz x 8-bit code words
C. 2 x 4-bit code words x 8 kHz
D. 2 x 4 kHz x 8-bit code words
Answer: D
4. Which two of the following statements represent a preferred wireless LWAPP implementation?(Choose
two.)
A. verify open ports for:
Layer 2 LWAPP on ethertype OxABAB
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---

Test4pass Easiest way to pass IT exams


Layer 3 LWAPP on TCP 12222 and TCP 12223
B. verify open ports for:
Layer 2 LWAPP on ethertype OxBBBB
Layer 3 LWAPP on UDP 12222 and UDP 12223
C. verify open ports for:
Layer 2 LWAPP on ethertype OxBABA
Layer 3 LWAPP on UDP 12222 and TCP 12223
D. use of Layer 3 LWAPP is preferred over Layer 2 LWAPP
E. use of Layer 2 LWAPP is preferred over Layer 3 LWAPP
Answer: BD
5. Which statement identifies a benefit obtained when using a top-down network design plan?
A. allows quick responses to design requests
B. facilitates design based on previous experience
C. incorporates customer organizational requirements
D. is less time-consuming than using a bottom-up approach
E. provides a more detailed picture of the desired network
Answer: C
6. A lightweight access point is added to a working network. Which sequence will it use to associate itself
with a wireless LAN controller?
A. master, primary, secondary, tertiary, greatest AP capacity
B. greatest AP capacity, primary, secondary, tertiary, master
C. primary, secondary, tertiary, master, greatest AP capacity
D. primary, secondary, tertiary, greatest AP capacity, master
Answer: C
7. Which statement accurately describes one difference between a small office and medium office
topology?
A. Small offices commonly use Rapid PVST+ for Layer 3 deployments.
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---

Test4pass Easiest way to pass IT exams


B. Medium offices commonly use integrated route and switching platforms.
C. Medium offices use integrated 10/100/1000 interfaces as Layer 2 trunks.
D. Medium offices use external access switches to support LAN connectivity.
Answer: D
8. Which three of these describe the best practice for Cisco wireless outdoor Mesh network deployment?
(Choose three.)
A. RAP implemented with 20 to 32 MAP nodes
B. RAP implemented with 20 or fewer MAP nodes
C. mesh hop counts of 8 to 4
D. mesh hop counts of 4 or fewer
E. client access via 802.11b/g and backhaul with 802.11a
F. client access via 802.11a and backhaul with 802.11b/g
Answer: BDE
9. Data link switching is typically used in which Enterprise Campus Module layer?
A. Server Farm
B. Campus Core
C. Building Access
D. Building Distribution
E. Internet Connectivity
Answer: C
10. Which two statements best describe intradomain route summarization? (Choose two.)
A. OSPF and RIP automatically summarize at classful network boundaries.
B. EIGRP and OSPF automatically summarize at classful network boundaries.
C. EIGRP and RIP automatically summarize at classful network boundaries.
D. EIGRP and OSPF must be manually configured to summarize at non-classful boundaries.
E. EIGRP and OSPF automatically summarize at non-classful boundaries.
Answer: CD
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---

Test4pass Easiest way to pass IT exams


11. Which Cisco security solution offers protection against "day zero" attacks?
A. Cisco Adaptive Security Appliance
B. Cisco Security Agent
C. Cisco IOS Firewall
D. Cisco IOS IPS
E. Cisco Traffic Anomaly Detector
Answer: B
12. Which statement can a network designer use to describe route summarization to an IT manager?
A. It is the grouping of multiple contiguous subnets into one Class A, B, or C IP address to minimize routing
table size.
B. It is the grouping of multiple discontiguous subnets to increase routing performance.
C. It is the grouping of multiple contiguous networks and advertising as one large network.
D. It is the grouping of ISP network addresses to minimize the number of routes to the Internet.
Answer: C
13. Which three of these are components of the North American Numbering Plan? (Choose three.)
A. Numbering Plan Area
B. country code
C. prefix
D. zone
E. line number
F. trunk channel
Answer: ACE
14. Which two statements about designing the Enterprise Data Center Access submodule are correct?
(Choose two.)
A. Multiport NIC servers should each have their own IP address.
B. Layer 3 connectivity should never be used in the access layer.
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---

Test4pass Easiest way to pass IT exams


C. Layer 2 connectivity is primarily implemented in the access layer.
D. Multiport NIC servers should never be used in the access layer.
E. Layer 2 clustering implementation requires servers to be Layer 2 adjacent.
Answer: CE
15. Which transmission medium should you recommend to this customer?
A. shielded twisted pair
B. unshielded twisted pair
C. multimode fiber
D. single-mode fiber
E. wireless
Answer: D
16. In the Cisco branch office design, what categorizes an office as large?
A. between 50 and 100 users and a three-tier design
B. between 50 and 100 users and a single-tier design
C. between 100 and 200 users and a two-tier design
D. between 100 and 200 users and a three-tier design
E. over 200 users and a two-tier design
Answer: D
17. A very large organization has received its IPv6 address range from its Internet Service
Provider and intends to use only IPv6 addresses internally. Employees will access the
Internet using port address translation. What is a requirement for their DNS servers?
A. They no longer need DNS servers.
B. Their DNS servers need to support both IPv4 and IPv6 addresses.
C. Their DNS servers need to support only IPv6 addresses.
D. Their DNS servers need to support only IPv4 addresses.
E. They need additional DNS servers in their network just for IPv6 addresses.
F. There are no changes required to their DNS servers.
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---

Test4pass Easiest way to pass IT exams


Answer: B
18. Refer to the exhibit.
Which layer is the distribution layer?
A. Layer A
B. Layer B
C. Layer C
D. Layers A and B form a consolidated core and distribution layer
Answer: B
19. Which two implementation plan principles best describe how to deal with potential failures?(Choose
two.)
A. A good implementation plan.
B. A successful test network test.
C. A test should be included at every step.
D. A detailed rollback procedure for each implementation step.
E. A table of failure points, rollback steps, and estimated rollback times.
Answer: CD
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---

Test4pass Easiest way to pass IT exams


20. Refer to the exhibit.
A standard, Layer 2 campus network design is pictured. Which numbered box represents the distribution
layer?
A. #1
B. #2
C. #3
D. #4
Answer: B
Test4pass Help You Pass Any IT Exam http://www.test4pass.com

---