Interwise
Connect


Video Conferencing

Version 7.2

---

Interwise Connect


Table of Contents
INTRODUCTION .................................................................................................. 3
VIDEO CONFERENCING POWERS INTERWISE CONNECT ............................ 3
Attaching a Web Camera to Transmit Video within Interwise Video Conferencing......... 3
Multipoint Video Conferencing in iMeetings ........................................................................ 3
Two-way Video Conferencing in iMentoring and iClass Events ........................................ 4
Video Conferencing Setup ..................................................................................................... 5
INTERWISE CONNECT VIDEO TECHNICAL REQUIREMENTS........................ 7
Device....................................................................................................................................... 7
Bandwidth ................................................................................................................................ 7
TROUBLESHOOTING ......................................................................................... 8
Video Settings for Low Bandwidth Environment ................................................................ 8
Wrong Video Configuration Message ................................................................................... 8
Video and Application Sharing .............................................................................................. 8

Video
Conferencing

2

---

Interwise Connect

Introduction
Interwise Connect is the Web platform that powers Interwise meeting sessions with
participants from virtually anywhere, using their PC, TDM or Mobile phone. Interwise
meetings are enabled with advanced conferencing services that enable data sharing,
application sharing, chatting, the sharing of emotions (via emoticons), white board sharing,
and session recording and playback capabilities, in addition to voice and video conferencing.
Interwise Connect provides a comprehensive, highly scalable, and unique, efficient
utilization of bandwidth that remains near constant while expanding to large conference
sessions. All capabilities and meeting features are enabled via a single platform with a
common simple to use web-based interface.
Video Conferencing powers Interwise Connect
Attaching a Web Camera to Transmit Video within Interwise Video
Conferencing
The Interwise Participant application supports the Microsoft Video for Windows API that
ensures compatibility with virtually all web cameras available today. The web camera driver
should be installed and the web camera USB cable should be attached to the Participant’s PC
in order to enable the Participant to stream their video to other Participants.
Video Conferencing Capabilities Per Interwise Event Type:

Interwise Event Type
Video Conferencing Mode
iMentoring
Two-way Video Conferencing
iMeeting
Multipoint Video Conferencing
iClass
Two-way Video Conferencing
iSeminar
One-way Video Conferencing
iCast
One-way Video Conferencing
Multipoint Video Conferencing in iMeetings
Up to five video enabled Participants can stream video in parallel to other Participants who
are not transmitting video. All Participants can view the Participant streamed video in
parallel in up to 5 QCIF (Quarter Common Intermediate Format of 144 lines and 176 pixels
per line) sized video windows via the Participant application. Participants who streamed
video and exit from the Event immediately enable a new video-enabled Participant to take
their place.
Video
Conferencing

3

---

Interwise Connect


Setting up for an iMeeting Event
Participants joining an iMeeting are required to send a captured, QCIF sized, still image to all
other Participants (as shown in Figure 1). This image is displayed whenever the Participant is
not speaking.

Figure 1: Sending the ‘captured’ image to other Participants
Video Conferencing
Once a Participant goes ‘On Air’ and starts speaking, the captured image is replaced with live
real-time streamed video. When the Participant ‘exits the stage’, the display automatically
switches back to the captured image.
During a voice activated iMeeting, live video is shown for each speaker who has
a properly installed and USB attached video web camera.

Figure 2: Video Conferencing
The speaker in a Queued iMeeting can initiate a conversation with another Participant,
which initiates two-way video streaming of the two conferencing Participants. The additional
three Participants’ images in the video pane will display the captured images.
Two-way Video Conferencing in iMentoring and iClass Events
Two-way QCIF streaming video is now enabled. Both the Moderator and Participant (or
Co-Moderator) in conversation can watch each other, while other Participants and
Co-Moderators can watch both interacting.

Video
Conferencing

4

---

Interwise Connect


Figure 3: Two-way Streaming Video

Video Conferencing Setup
Select Options from the File menu in the Participant application, and then in the Video tab
of the displayed window, click Compression.
The Video Compression Configuration window is displayed, as shown in Figure 4.

Figure 4: Video Compression Configuration Window
In this window, you can select the following:

Hardware Compression – Select this option when you use an Osprey video card with an
attached video camera that performs a Microsoft Video for Windows compatible
hardware compression, instead of the PC’s main CPU.

Software Compression – Select this option when you use a USB web camera.
Software Compression Settings

Format: Software compressed format - H261 or H263 (Use the H.263 for enhanced
video quality).

Rate Control:
Video
Conferencing

5

---

Interwise Connect

Fixed Bit Rate: Defines the maximum bandwidth utilized by the encoded video
camera streaming. Picture frame rate and quality are adjusted accordingly.
Fixed Frame Rate: According to settings of frame rate and picture quality. Required
bandwidth is not fixed and may reach levels exceeding the available bandwidth.
Consequently, this option is not recommended unless high bandwidth is available.

Key Frame: Sets the time frame for sending a full sample of video image.
Frame Rate Settings
Select Options from the File menu in the Participant application, and then in the Video tab
of the displayed window, select the required FPS (Frames Per Second) from the dropdown
list). These settings apply to Software Compression using Fixed Frame Rate features.
The frame rate defines the number of video frames shown per second. The default frame
rate is set to five frames per second.
In good IP bandwidth conditions (such as above 256Kbps) it is highly recommended to set
the frame rate to 30fps for an enhanced smooth video motion experience.
To overcome a known bug for this setup, please stop your video first than setup the FPS
(Frame Rate Per second) and than reactivate your Web camera with the 30 frames per
second.
Video
Conferencing

6

---

Interwise Connect

Interwise Connect Video Technical Requirements
Device
Interwise Connect supports any Video Capture Device (camera, board with camera) that:

Supports the VFW (Video For Windows) API

Has one of the following input formats:
Compressed: H263, H261
Uncompressed: I420, IYUV, YVU9, YUY2, YV12, UYVY, RGB24, RGB555,
RGB565

Supports a frame size of 176x144 (QCIF) or less.
Bandwidth

Participant application minimum requirements:
TCP/IP intranet access or modem Internet access ≥ 56K, combined with Video fixed bit
rate of 32K.
For two-way simultaneous video, the recommended bandwidth is ≥ 96K.

Video data is always in synch with audio (Lips Synchronization) and other data types
transferred in an Interwise Event. However, audio and data have higher priority in the
communication queue and therefore video data will be sent only when bandwidth allows
it.

Interwise has implemented a bandwidth protection mechanism that will shutdown video
operations when encountering network congestion or bandwidth lower than the above
required specifications. The video streaming bandwidth is set to 256KB by default.

Note that a stable, high bandwidth environment will allow you to enjoy high quality
video conferencing of 30 frames per second.

Video
Conferencing

7

---

Interwise Connect

Troubleshooting
Video Settings for Low Bandwidth Environment
Video bandwidth requirements are at least 56K per Participant with fixed bit rate set to 32K.
If your bandwidth is low but you still wish to participate in a video Event, the following
settings are recommended:

Format
Rate Control
Key Frame
Frame Rate
H263
8 kbps fixed bit rate
Every 10 seconds
5
You can also set your camera to a smaller frame size to enhance performance.
Note: Attempting to activate the video in a very low bandwidth environment may cause the
‘Intelligent Video’ bandwidth protection mechanism to close the video window.
Wrong Video Configuration Message
The Video camera configuration message may cause the Participant application to
disconnect from an Event.
Workaround: Configure and test video image size and attributes prior to an Event to
prevent the configuration message from popping up.
Video and Application Sharing
Application Sharing or Over The Shoulder initiated while the initiator’s video is on can cause
the video window to close.
Workaround: Restart the video after Application Sharing or OTS is up and running.
Video
Conferencing

8

---

Document Outline

• ÿ
  • • ÿ
  • • ÿ
  • ÿ
  • • ÿ
• ÿ
  • ÿ
• • ÿ
  • ÿ

---