Material Safety Data Sheet: Soybean Oil

341 Christian Street, Oxford, CT 06478 USA
Tel: (203) 267-6061 Fax: (203) 267-6065
www.naturalsourcing.com info@naturalsourcing.com
MATERIAL SAFETY DATA SHEET

MSDS
SOYBEAN OIL

1. PRODUCT NAME AND COMPANY IDENTIFICATION
Product Name:
SOYBEAN OIL
Product Use:
Personal Care Formulations
Company Name:
Natural Sourcing
Company Address:
341 Christian Street, Oxford, CT 06478, USA
Date Issued:
1/1/2008
Emergency Telephone Number:
Chemtrec Tel: (800) 262-8200

2. COMPOSITION/INGREDIENT INFORMATION
Ingredients:

Vegetable Oil Triglycerides
100%
Hazardous Components:
None
CAS #:


3. HAZARDS IDENTIFICATION
Routes of Entry
Eye Contact:
Mild irritation may occur
Skin Contact:
May cause irritation in sensitive individuals with prolonged
exposure
Ingestion:
Food Grade
Inhalation:
Inhalation of fine mist may effect respiratory system

4. FIRST AID MEASURES
Eyes:
Flush with plenty of water or eye wash solution for 15 minutes.
Get medical attention if irritation persists.
Skin:
Wash with soap and flush with plenty of water
Ingestion:
N/A
Inhalation:
Remove to fresh air and seek medical attention
Medical Conditions Generally
None
Aggravated by Exposure:

5. FIRE FIGHTING MEASURES
Flash Point (Method Used):
> 550˚F Close Cup
Flammable Limits
LEL:
Low
UEL:
Low
Extinguishing Media:
Dry Chemical, Carbon Dioxide, Foam
Special Firefighting Procedures:
Cool containers exposed to flame with water. Limit the spread

Page 1 of 3

---

of oil. Treat as an oil (edible fat) fire. Use air supplied
equipment for fighting interior fires.
Unusual Fire & Explosion Hazards:
Rags and/or other materials containing this material may heat
and spontaneously ignite if exposed to air. Store rags and
similar materials in air tight containers. Avoid use of water in
extinguishing oil fires.

6. ACCIDENTAL RELEASE MEASURES (STEPS FOR SPILLS)
Methods for Cleaning Up:
Absorb onto an inert, absorbent substrate and sweep up. Wash
area with soap and water.

7. HANDLING AND STORAGE
Handling
Safe Handling:
Keep away from fire and open flames. Do not overheat.


Storage
Requirements for Storage Areas and
Store in a cool, dry location, in a sealed container.
Containers:

8. EXPOSURE CONTROL/PERSONAL PROTECTION
Eye:
Safety glasses should be worn.
Skin/Body:
Aprons, gloves should be worn.
Respiratory:
Not needed under normal conditions of use.
Other:
Evaluate need based on application. Slip proof shoes may be
worn where spills may occur.
Work/Hygiene Practice:
Normal work and hygiene practices for handling non-hazardous
liquid material.

9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State:
Liquid oil
Color:
Clear, pale yellow
Odor:
Characteristic, bland, fatty oil
pH:
N/A
Vapor Pressure (mm Hg.):
N/A
Vapor Density (AIR = 1):
>1
Boiling Point:
N/A
Melting Point:
N/A
Auto Ignition Temperature:
N/A
Specific Gravity (H2O = 1):
0.920 - 0.925
Evaporation Rate:
N/A
Solubility in Water:
Insoluble
Water Reactive:
No

10. STABILITY AND REACTIVITY
Stability:
Generally stable, becomes rancid on extended exposure to air.
Incompatibility (Materials to Avoid):
Avoid strong oxidizers

Conditions to Avoid:
Excessive heat

Page 2 of 3

---

Hazardous Decomposition or
not known
Byproducts:
Hazardous Polymerization:
Will Not Occur

11. TOXICOLOGICAL INFORMATION

Acute Effects of Overexposure:
None established
Chronic Effects of Overexposure:
None established
Medical Conditions Generally
None
Aggravated by Exposure:
Irritancy:
Skin: Not expected to be an irritant
Eyes: Not expected to be an irritant
Carcinogenicity:
None


12. ECOLOGICAL INFORMATION
No information


13. DISPOSAL CONSIDERATIONS
Waste Disposal Methods:
Do not put into sewer lines. Dispose of according to local, state
and federal regulations.

14. TRANSPORT INFORMATION
DOT Classification:
Not a DOT controlled material (USA). Ship as food stuff, not to
be loaded with incompatible materials including poisons.
Class/Division:
Not restricted
Proper Shipping Name:
NA
Label:
None
Packing Group:
NA
ID Number:
NA
Hazard:
NA

15. REGULATORY INFORMATION
Not Available


16. ADDITIONAL INFORMATION
This information is provided for documentation purposes only.
This product is not considered hazardous.

The complete range of conditions or methods of use are beyond our control therefore we do not assume
any responsibility and expressly disclaim any liability for any use of this product. Information contained
herein is believed to be true and accurate however, all statements or suggestions are made without
warranty, expressed or implied, regarding accuracy of the information, the hazards connected with the
use of the material or the results to be obtained from the use thereof. Compliance with all applicable
federal, state, and local laws and local regulations remains the responsibility of the user.

This safety sheet cannot cover all possible situations which the user may experience during processing.
Each aspect of your operation should be examined to determine if, or where, additional precautions may
be necessary. All health and safety information contained in this bulletin should be provided to your
employees or customers.


Page 3 of 3

---