There are many processes that fall under extrusion

There are many processes that fall under extrusion. Glass, plastic, metals and many others are often involved to accomplish them. The tools and machines to be used depend greatly on the type of task you are aiming to achieve. Here are some of the most commonly used extrusion equipment today: a single screw auger, an extrusion press, a twin screw auger, a die set, a hydraulic press, and a lot more. Over the years, men have discovered more and more materials that can be extruded. The following are just some of them: 1. aluminum - this ranks as the number 1 most extruded material on earth. It can undergo cold or hot extrusion. If used in hot extrusion, it can be exposed to heat that is about 300 to 600 degrees Celsius. Examples of its finished products are heat sinks, frames, tracks, rails and mullions. 2. steel - the plain carbon steel kind is used more often than any other type of steel. However, many industries also use stainless steel and alloy steel in their operations. When extruded, temperature can go anywhere between 1000 to 1300 degrees Celsius. Examples of its finished products are tracks and rods. 3. copper - it can be exposed to pressure that is about 100 ksi. When extruded, it can be used to create wire, pipe, tubes, rods, welding electrodes and bars. 5. magnesium - it has almost similar extrusion properties as aluminum. Examples of its finished products are nuclear industry materials and aircraft parts. The PIPE WELDING ELECTRODES site is very important for this purpose